-
The causes and solutions of burrs in injection molding processJul 21, 2022Injection molding process will occur in the process of a variety of problems, burrs is one of the common problems, injection molding process master ho
-
What is the cause of shrinkage marks on the surface of injection molded products? Teach you a few...Jul 20, 2022During the production of injection molded products , some products may have uneven surface shrinkage due to uneven wall thickness, thus producing shri
-
What is the best way to control the size of injection molded products and how to control it?Jul 20, 2022The appearance accuracy of injection molded products should meet strict dimensional tolerances, form tolerances and surface roughness. To carry out pr
-
What is the purpose of adding glass fiber to plastic materials in injection molding?Jul 08, 2022Thermoplastics do have natural mechanical properties that impart strength, durability, impact resistance and other benefits in plastic molded parts, a
-
Why is material selection important in injection molding?Jul 08, 2022Material selection is a key consideration in injection molding. For example, for consumer parts, if aesthetics are important, materials that can be ea
-
How to solve the lusterless surface of plastic injection molded partsJul 08, 2022Low gloss means a dull and non-glossy surface and low transparency of transparent products. There are many reasons for poor gloss. General product sur
-
What are the factors that affect the quality of injection mouldsJul 08, 2022Injection mold manufacturing and processing is a very complex process. From injection mold design, processing, assembly, mold trial to mass production
-
What are the characteristics of CNC milling Machining complex partsJun 18, 2022CNC machining is one of the more common manufacturing processes. This is mainly due to its high precision, accuracy and tight tolerance range. In fact
-
Analysis of the reasons for the silver pattern in injection molded products from the plastic sideJun 18, 2022Injection molded products are prone to silver streaking during the production process, and this phenomenon occurs for a variety of reasons. And the pl
-
What are the requirements for designing the cavity arrangement of injection molds?Jun 18, 2022The design of injection molded parts generally requires the design of the number of cavities and their arrangement. The design of mold cavities cannot
-
What does the coating of the injection mold do to the mold?Jun 18, 2022With the development of injection mold processing technology, its structure becomes more and more complex, along with the emergence of new plastic mat
-
Introduction of the three plates opening sequence in plastic injection mold manufacturingJun 18, 2022The three-plate mold has three parts - one between the runner plate and the cavity plate, the second between the runner plate and the top clamping pla


