Blogs

The threads of injection molded parts are divided into internal and external threads, and the thread shapes of threaded products are generally divided

1. mold pre-inspection. The mold installed on the plastic mold once should be inspected, in order to timely detection of quality problems, and mold re

Surrounding the tree mold, also known as prefabricated concrete tree pool cover mold, the use of the local different by the title is also inconsistent

As technology becomes more and more developed plastic products mold has long become an irreplaceable product in our days, in our real-life plastic pro

Plastic mold temperature on injection molding, but a very important link. If the plastic mold temperature control is good, processing out of the produ

Plastic mold injection molding products appear to warpage and deformation is a very piece of the zigzag problem. Mainly should be dealt with from the

Shaft parts are a common type of parts, its structure is a rotating body, the length is generally greater than the diameter, in a variety of mechanica

1. LCP material treatment process (liquid crystal polymer) Focus: LCP material should be dried before use, the temperature is about 150 ℃, the time is

Injection molds are often burned due to some reasons during production. According to the burn caused by different reasons such as machinery, mold, or

The rubber mold is one of the simplest methods in rapid mold. Generally, the RP prototype is re-molded with silicone, but the lifespan is very short o

Main process parameter categories The important conditions of the injection molding process include temperature, pressure and the corresponding action

PC has excellent performance, high transparency, good impact toughness, creep resistance, and a wide temperature range. The melt viscosity is high, th