Water transfer-the use of water pressure and activator to dissolve and transfer the peeling layer on the water transfer carrier film
The basic process is:
1. Film printing: printing various patterns on the polymer film;
2. Primer spraying: many materials must be coated with an adhesive, such as metal, ceramics, etc., if you want to transfer different patterns, you must use different base colors, such as wood grain basically use brown, brown, earth yellow, etc. The stone pattern basically uses white, etc .;
3. The extension of the membrane: let the membrane lay flat on the water surface, and wait for the membrane to stretch and flat;
4. Activation: Activate the pattern of the transfer film into an ink state with a special solvent (activator);
5. Transfer: use water pressure to print the activated pattern on the object to be printed;
6. Washing: Wash the impurities remaining on the printed workpiece with water;
7. Drying: Dry the printed workpiece, the temperature depends on the quality and melting point of the material;
8. Spray paint: spray transparent protective paint to protect the surface of the printed object;
9. Drying: Dry the surface of the finished sprayed paint.
There are two types of water transfer technology, one is watermark transfer technology, and the other is water drape transfer technology, the former mainly completes the transfer of text and photo patterns, the latter tends to complete the entire product surface Transfer.
The overlay transfer technology uses an aqueous film that dissolves easily in water to carry graphics. Due to the excellent tension of the water-coated film, it is easy to wrap around the surface of the product to form a graphic layer, and the product surface has a completely different appearance like spray paint. The overlay transfer technology can overlay color patterns on workpieces of any shape to solve the problem of three-dimensional product printing for manufacturers.
Curved surface coating can also add different grains on the surface of the product, such as leather grain, wood grain, jade grain and marble grain, etc. At the same time, it can also avoid the common vacancy in general board printing. And in the printing process, because the product surface does not need to be in contact with the printed film, it can avoid damaging the product surface and its integrity.
Water Transfer Printing for surface treatment of injection products
May 26, 2020
Leave a message
Send Inquiry

