Advantages of CNC lathe

Advantages of CNC lathe

The following are some of the advantages of CNC lathes for your reference:

1. If the CNC lathe is programmed correctly, it can usually produce 100% of products accurately. They produce parts to improve accuracy to a greater extent. Provide good positioning accuracy and repeatability. Because of their accuracy and ability to reuse programs, they can provide higher quality.

2. It is suitable for CNC lathe processing parts. As CNC lathe processing is very suitable for a variety of small and medium-sized parts, the processing and manufacturing costs of CNC lathes are gradually decreasing. You can shorten the debugging time and the time to prepare the mold, or you can choose

3. Once you learn the CNC lathe, it will not be difficult to use. For example, because there are fewer fixtures, there is no need to use complex fixtures and fixtures in all areas, thereby reducing actual storage requirements. Since no complicated fixtures and fixing devices are required, the cost of the mold is reduced. After passing the inspection, the inspection of subsequent parts is reduced. Advanced machine control and programming functions make complex machining operations easier.

4. Modern CNC lathe design software allows designers to simulate their own ideas. No need to make prototypes or models. This saves time and money.

5. The use of CNC lathes can effectively reduce the time required to produce furniture. CNC lathes enable operators to make changes or improvements with less delay or expense. Reduce waste, because errors due to operator fatigue, interruptions and other factors are unlikely to occur. Improve production plans because they can usually perform work in a setup that usually requires multiple conventional machines. Due to reduced mold costs, delivery time is shortened.

6. In addition to the occasional maintenance time, the CNC lathe can be used 24 hours a day, 365 days a day.

7. The surface roughness value of the small parts processed by the CNC lathe and the material allowance on the workpiece and the tool angle allows, the surface roughness depends on the cutting speed, while the feed speed of the ordinary lathe is a constant speed, and the diameter is different The cutting speed is different, such as CNC lathe processing with constant cutting function, and the same linear speed can be used to face cylinders of different diameters, to ensure that the surface roughness value is small and the surface roughness processed on different surfaces, a smaller surface The roughness is consistent with the use. The feed speed is small, the surface roughness is large, the use feed speed is large, and the variability is very good, which is difficult to achieve on ordinary lathes.

8. Through the use of "virtual software", training in the use of CNC can be carried out. The software allows the operator to practice using the CNC lathe on the computer screen. The software is similar to a computer game, which can make the learning process interesting and easy to learn.

9. The rapid movement and positioning of the moving parts of the CNC lathe adopt acceleration and deceleration measures, and the high speed of the empty stroke is selected. Compared with the ordinary lathe, it takes much less time in the fast forward, fast retreat, and positioning.

10. One person can program many CNC lathes and then supervise them, usually allowing them to work on their own. Sometimes, the cutting tool needs to be replaced only occasionally.