In the process of plastic injection molding, the temperature is too high or too low, it will have a negative impact on the molded injection molded products,
First of all, we should know that injection molding is an important injection molding process, because the temperature of the mold is relatively low at the beginning, when the material enters the mold, the temperature of the melt will also drop sharply, but the density and viscosity of the melt are increasing. The compensating ability of the melt depends mainly on the size of the holding pressure, and the time of the whole punching process when the holding pressure drops but the melt still passes into the mold.
Therefore, it is very important to control the temperature during the injection molding process. Too high or too low temperature will lead to product quality failure, and even have a negative impact on the injection molding machine, mold, etc. Then in plastic mold injection, if the injection molding machine temperature is too high, what kind of impact will it cause?
1. High temperature of the injection molding machine will make the oil viscosity decrease: when the injection molding process is the too high temperature will make the oil viscosity decrease, and there may also be an increase in leakage, this time the volume efficiency of the pump and the efficiency of the whole system will also have a significant reduction. If the oil viscosity decreases when the sliding valve and other moving parts of the oil film become thin and cut, frictional resistance increases, resulting in deterioration of lubricant performance.
2. The phenomenon of thermal deformation caused by the machinery: Due to the small clearance of the plastic mold, the moving parts with different thermal expansion coefficients in the hydraulic components jam, resulting in the failure of the plastic mold movement, which seriously affects the transmission accuracy of the hydraulic system and causes the poor working quality of the parts processed by injection molding. Thus, the working performance of the hydraulic system deteriorates the quality of work of the components.
3. The temperature of the injection molding machine rises, causing the deformation of the seals, reducing the sealing performance and service life, and resulting in leakage. The temperature of the injection molding machine will lead to the deterioration of the quality of the workpiece, and the decomposition of the gas in the oil and will reduce the working performance of the hydraulic system. It will affect the working parts of the system.
4. cause the poor quality of work of injection molded parts: injection molding processing heat up too high, hydraulic components with different coefficients of thermal expansion in the parts must become smaller with the apprenticeship, the oil will also dissolve air escapes, cavitation, seriously affect the transmission accuracy of the hydraulic system, resulting in the poor quality of work of injection molded parts.
5. Accelerate the oxidation of the oil appears to deteriorate: injection molding processing of too high a temperature rise will accelerate the oxidation of oil deterioration, resolve the substance of asphalt, reduce the service life of hydraulic oil, and the analyzed material may block the buffer small hole and gap type valve mouth, resulting in pressure valve blockage and can not work, the metal pipeline may be extended bending or rupture.
In the injection molding process, especially precision injection molding, the control of product temperature is very important and has a great impact on the quality of injection molded products.
What is the effect of high temperature on injection molded parts
Aug 18, 2022
Leave a message
Send Inquiry

