Aluminum profiles are common, such as screens and aluminum windows. It uses an extrusion molding process, that is, after the aluminum ingots and other raw materials are melted in the furnace, they are extruded through the extruder until the mold flows out, and it can also extrude various profiles. The main properties, namely strength, hardness and wear resistance, are in accordance with the national standard GB6063. The advantages are: light weight is only 2.8, no rust, fast design change, low mold investment, and longitudinal extension of up to 10 meters. The appearance of aluminum profiles is divided into bright and matte. The treatment process adopts anodizing treatment, and the surface treatment oxide film reaches a thickness of 0.12m/m. The thickness of the aluminum profile is selected according to the optimization of product design. It is not the thicker on the market, the better. It should be designed according to the cross-sectional structure requirements. It can be uneven between 0.5 and 5 mm.
The layman thinks that thicker and tougher is actually a wrong view.
The surface quality of aluminum profiles also has more difficult defects to overcome: warpage, deformation, black lines, bumps and white lines. The designer with high level and the reasonable mold design and production process can avoid the above defects. The inspection of defects should be carried out according to the inspection method prescribed by the state, that is, the sight distance is 40~50CM to identify the defects.
Aluminum profiles are widely used in furniture: screen skeletons, various suspension beams, table legs, decorative strips, handles, cable troughs and covers, chair tubes, etc., can be kaleidoscopically designed and used!
Although there are many advantages of aluminum profiles, there are also undesirable places:
Aluminum materials that are not oxidized are prone to "rusting", resulting in reduced performance. The longitudinal strength is not as good as iron products. The wear resistance of the surface oxide layer is easier to scratch than the electroplated layer. The cost is higher and the cost of iron products is higher. Out about 3~4 times.
2.1 Compared with the processing method of die-casting alloy and profile, the equipment used is different. Its raw materials are aluminum ingots (about 92% purity) and alloy materials, which are melted by the furnace and enter the mold of the die-casting machine. The shape of die-cast aluminum products can be designed like a toy, with different shapes and convenient connection in all directions. In addition, it has high hardness and strength, and can be mixed with zinc to form zinc aluminum alloy.
The die-casting aluminum forming process is divided into:
1. Die-casting
2. Rough polishing to remove mold clamping material
3. Fine polishing
On the other hand, the die-casting aluminum production process should only be made with molds. The molds are very expensive and higher than other molds such as injection molds. At the same time, mold maintenance is very difficult, and it is difficult to reduce the material and repair when the design is wrong.
Disadvantages of die-casting aluminum:
Each time the production and processing quantity should be large, the cost is low. Polishing is more complicated, production cycle is slow, and product cost is about 3 to 4 times higher than injection parts. The screw hole requirements should be larger (diameter 4.5mm) the connection force is stable
Scope of application: table legs, shift fittings, decorative heads, aluminum profile seals, table tops and coffee table top holders, etc., the scope is very wide.

