Among the die-casting materials, zinc alloy die casting has always been one of the most popular die-casting materials. There are also different opinions on the material selection of zinc alloy die-casting. The content of different metal elements in the zinc alloy will have different properties in all aspects of the alloy. Impact, the current market is the national standard environmental protection No. 3 and No. 5 materials, so how can we distinguish the quality of No. 3 materials? The following are a few major elements that need to be paid attention to.
1. Look at the shrinking surface. The normal shrinkage surface is relatively uniform and stable. If the shrinkage surface is severe, special attention should be paid to the deep cavity on the surface. Insufficient heat, excessive temperature, or excessive lead in the manufacturing process may cause the shrinkage surface to shrink seriously. If the lead exceeds the standard, the shrunken surface will become lumpy like rain.
2. Look at the surface gloss. The surface gloss is bright, indicating that the material contains magnesium. After magnesium is added, the surface will be beautiful and shiny, which has a certain effect on anti-oxidation.
3. Check whether there are bumps or bumps on the surface.
4. Look at the material composition. Observing the composition table is the key to distinguish the grade of the entire zinc alloy material. Observation shows that excessive lead, tin, and cadmium can easily cause poor electroplating, blistering, peeling, and difficulty in electroplating, which will seriously affect the yield of electroplating products.

5. Look at the crystal, distinguish the No. 3 material, you can knock the material off, and see the crystal in the fracture zone. The crystals of the good No. 3 material are evenly arranged, and the crystals can be seen easily. Of course, the crystal structure is too large and unreasonable. The crystal structure is too large, generally because there is too little aluminum.

