With many factories, we can provide a wide range of Button Touch Springs factory, Electrical Plastic Cover factory, Wire EDM Parts factory. Our company's various products are famous for their perfect details, which can meet the needs of domestic and foreign markets at the same time. Our company adheres to a fast, efficient, and low-cost service communication, which is based on honesty.
Auto Air Filter, nozzles without fillers, desulfurization tower nozzles, atomizing nozzles, cooling tower accessories, nozzles, cooling tower water distributor nozzles and other injection molded parts.
Nozzle Filter Injection Molding the nozzle material is ABS plastic one-shot injection molding, high strength and long service life. The sprinkler distributes water evenly, and the working water pressure is low (the working pressure at the nozzle outlet is only 0.6mH2O). Because it has a specially designed locking and anti-loosening device, it can be firmly connected to the water distribution pipe without falling off, which can ensure long-term safe operation of the water distribution system. Under normal use conditions, the service life of the nozzle is 20 years.
Parameter of plastic Injection Molding
Product Name: | Nozzle Filter Injection parts |
Shaping Mode: | Plastic Injection Mould |
Plastic Material: | PP, PC, PS, PE, PVC, ABS, PMMA ect. |
Cavity: | Single & Multi |
Runner: | Hot Runner\ Cold Runner |
Mould life time: | 500000~+1,000,000 shots |
Design Software | UG,Pro E Solidwork,CATIAMoldflow.... |
Experience | 17 years experience in plastic injection mold making and plastic products produce |
Delivery Time | 20-30 days for mold, product according to quantity |
plastic Injection Machine | 10sets,90T,138T,160T,168T,200T,260T,320T,400T,488T,600T,1000T |
MOQ | 1set for mold ,plastic products as per your request |
Nozzle Filter Injection Mold Design: professional designers for your well-designed structure to achieve the shortest production cycle, to reduce unnecessary processing procedures, in order to improve production efficiency. runner structure : Cold runner, hot runner , and hot nozzle cold runner structure are the most common three.
Nozzle Filter Injection Mold Die accessories: insert, guide post, guide sleeve, slide, slide sets, and other wear-resistant lifter block of standard parts, in order to improve the mold life.
Our mold has passed ISO9001: 2000 international quality system certification, technical requirements are as follows:
1. Product molding process, mold structure and production process analysis. Ensure die life of up to 0.5 million times.
2. It must be designed to complete the mold structure and processing parts and made assembly requirements and the requirements of the injection molding process.
3. Appearance quality defects caused by plastic parts (such as shrinkage) or mold structural problems (such as Parting line, gate set, die life can not guarantee, and otehr problems
4. Mold appearance: the appearance of mold must ensure that no rust, no hit marks, no defects and other modules handling defects.
Customer satisfaction is the only reason we have always been there!
FAQ:
Q. What type of mould tool do I need?
A. Mould tools can be either single cavity (one part at a time) or multi-cavity (2,4, 8 or 16 parts at a time). Single cavity tools are generally used for small quantities, up to 10,000 parts per year whereas multi-cavity tools are for larger quantities. We can look at your projected annual requirements and recommend which would be best for you.
Q. What shall we do if we do not have drawings?
A. Please send your sample to our factory,then we can copy or provide you better solutions. Please send us pictures or drafts with dimensions(Length,Hight,Width),CAD or 3D file will be made for you if placed order.
Q: Can you do Assemble?
A: Of cause we could do. Our factory with assembly room.
Q. Can I test my idea/product before committing to mould tool manufacture?
A. Sure, we can use CAD drawings to make models and prototyping for design and functional evaluations.
Q: Can you do the finished product or parts Only?
A: Sure, We could do finished product according the customized mold. And make the mold also.
Q. I have an idea for a new product, but not sure if it can be manufactured. Can you help?
A. Yes! We are always happy to work with potential customers to evaluate the technical feasibility of your idea or design and we can advise on materials, tooling and likely set-up costs.
Q. My products have already been developed on CAD. Can you use the drawings?
A. Yes! DWG, DXF, IGES, Solidworks and Rhino files can all be used to generate quotes, models and mould tools - this can save time and money in producing your parts.
Q: How long is your delivery time?
A: Generally 5-7 days for plastic products.
25 days around to make a simple molds, complicated ones can be 30~50 days. We use our company DHL, TNT, UPS account to ensure the fast product delivery time.
Our Manufacturer Yttrium Zirconia Oxide Powder Yttria Stabilized Zirconia Powder integrate beautiful appearance, scientific manufacturing technology and high cost performance. We adhere to the industrial concept of keeping technology leading, adhere to scientific and technological innovation, and constantly break through ourselves. We provide our products to every customer all over the world with flexible, fast and efficient service and the strictest quality control standards.