Products
EDM Diamond Wire Guide 0.255mm S101 Sodick Wire Cutting EDM Wear Parts

EDM Diamond Wire Guide 0.255mm S101 Sodick Wire Cutting EDM Wear Parts

Tolerance: ±0.002mm
Surface Treatment: Oxidizing, Coating,TiCN,TiN,Aitain,Ticrn,Nitrding,Black oxygened,Black coating etc
Application: Medical Instruments/Electronic/ Industrial// Automation / motorcycle/3D printer
Send Inquiry

We hope that our company will become a model of industry innovation not only with the environmentally friendly Wire EDM Spare Parts, Injection Molding Small Parts, Brass Die Casting Parts produced, but also with the systematic process of improving efficiency and saving costs. On the basis of learning from foreign countries' technology, our company has independent innovation, built a number of special production lines suitable with large-scale production capacity for us. Our company adheres to the development direction of science and technology, pays close attention to the development trend of international industry, introduces international advanced technology, equipment and management experience. Our company has accumulated some long-term cooperative partners for ourselves with our good faith, considerate and warm service.

The principle of wire EDM is to manipulate the continuously moving metal wire as the east and west electrodes, and the processing method of electric erosion cutting parts formed when pulse discharge occurs between the workpiece and the workpiece. The wire electrode wire used for wire cutting is molybdenum wire, tungsten wire or copper wire with a very small diameter (0.04~0.2mm). The machining accuracy can reach plus or minus 0.01~0.005mm, and the roughness can reach Ra3.2~1.6 microns. It can process fine, narrow, and complex holes, and can be used for processing molds, templates or forming tools.

The hardness of the electrode does not need to be higher than the hardness of the workpiece material, unlike cutting, the hardness of the tool must be higher than the workpiece

wire edm parts wire-EDM

Wire EDM products oem wire edm

Parameter of Wire EDM Parts


Product name

Wire EDM Wear Parts

Application

Medical Instruments/Electronic/ Industrial// Automation / motorcycle/3D printer

Company style

OEM

Drawing

2D/3D/PDF/stemp/gsw

Surface Roughness

Ra0.2

manufacture size

From 0.1mm to 6000mm

QC System

Pre-inspection, intermediate inspection, post-inspection, three procedures to ensure that each product is qualified

Quality assurance

99.9% qualified

Sample

Sample can be provided.

After-Sales Service

if product is damaged,refund or repair for customer,Until the customer is satisfied


our factory

1

pack

3

4

1. The main processing objects of EDM forming machine tools are the printing of delicate patterns or curved surfaces. The wire EDM machine mainly processes flat workpieces. The movement of wire EDM is to move the workpiece, while EDM is to move the electrode to realize the machining.

2. Electric discharge machining can process through holes and blind holes, and is suitable for processing complex-shaped plastic molds and other parts of the cavity, engraving characters, patterns, etc.; while wire EDM can only process through holes, which can easily produce small Holes, slits with complex shapes and various parts with complex shapes.


We always hold a 'magnifying glass' in work, and we are meticulous about each node, each process, and each place that needs to be inspected or paid attention to, ensuring our EDM Diamond Wire Guide 0.255mm S101 Sodick Wire Cutting EDM Wear Parts maintaining in excellent quality. We have been ready to share our knowledge of internet marketing worldwide and recommend you suitable merchandise at most aggressive rates. For a long time, our company adheres to the policy of 'bringing in and going out' in technology exchange and strategic cooperation.

Send Inquiry