In the fierce market competition, the Plastic Extrusion Dies factory, Connector Injection Molding, Trampoline Springs factory produced by our company have won the favor of the majority of customers with reliable quality, good performance and excellent after-sales service. Since its establishment, we have established good business relations with many foreign enterprises and accumulated a lot of valuable experience, so that our product quality, price and service are highly competitive. Our mission has always been simple: To delight our customers with best quality hair products and deliver on time. Our company creates the future with high standards and new technologies. While expanding our company, we also provide high-quality products and services for our customers. In the past few years, our business absorbed and digested advanced technologies both equally at home and abroad.
Lighting System Injection Molding is generally composed of base and lamp housing, different car series have different configurations, the main parts of the front and rear lights are: left and right lenses. Left and right decorative frame. Left and right lamp housing. Left and right reflector, etc. The appearance of automotive lights requires high, several important parts are transparent parts, electroplated parts, etc. The material of the base is usually thermosetting material - BMC, the lamp housing can be processed from PMMA, PP, ABS and other materials, usually two-color or three-color. It can be said that the most demanding parts of the car appearance is the lights, so the mold design and manufacturing requirements are extremely high.
Parts name | Lighting System Injection Molding |
Plastic Material | PMMA, POM, PPS, ABS,ABS+GF,ABS+PC,POM(Derlin),PP, PE,PC,PMMA(Acrylic),PVC,PEI,PBT,PTFI |
Pls Provide | 2D, 3D, samples, or the size of the multi-angle pictures |


The quality of automotive lighting is very important to the safety of driving, so we use materials with European light transmission, and can be resistant to high temperature corrosion materials, the design of lamps and lanterns not only to meet the requirements of safety regulations, but also to meet the requirements of beauty and practicality, combined with the different car series, the appearance of the car to the entire appearance of the car into one, beautiful and practical, in line with the requirements of aerodynamics. In order to meet this requirement, we also introduced two-color injection molding in Lighting System Injection Molding. This offers meaningful savings potential and new design possibilities for product manufacturing. Multi-color injection molding also places new demands on injection equipment. In terms of injection units, parallel and co-directional, parallel and opposite, horizontal and vertical L-shape and Y-shape co-directional single cylinder injection structures are available. As far as mixing nozzles are concerned, special nozzles such as pattern, wave, flow mark, gradient and interlayer can be selected. As far as the clamping mold is concerned, standard type, vertical turntable type, horizontal turntable type, pivot type and robotic rotation type mechanisms can be selected.
One of the key factors of multi-color injection molding is the versatility of computer-controlled programs. This is because even for the same type of multi-color product, if different mold designs are used, they must be paired with different electronic control programs.

.
We will relentlessly pursue technological and managerial innovation, and make every effort to promote our Customized Design 3D HDPE Injection Molding upgrading and industry development. We welcome new and old shoppers to make contact with us by telephone or mail us inquiries by mail for foreseeable future company associations and attaining mutual achievements. We welcome you to visit our showroom and office.

