Products
China Factory Stainless Steel CNC Lathe Turning Part

China Factory Stainless Steel CNC Lathe Turning Part

Available materials: stainless steel, steel, brass, bronze, aluminum and more
Process :CNC milling and turning, drilling, grinding, bending, stamping, tapping,tinning,zinc plating,wiping of oil.
Surface Roughness: Ra1.0-2.8
Drawing format: DWG/ IGS/ STEP/STEP,/IGES/X-T/PDF and etc.
Send Inquiry

With excellent management and development advantages, advanced development concept, advanced development idea and successful operation mode, the products of Pdc Aluminium Casting, Metal 3D Printing Parts, Plastic Bottle Mold are welcomed all over the world. Innovation is our unremitting pursuit, quality assurance is our eternal concept, customer satisfaction is our greatest wish. We always pursue the good quality of products. We have formed a set of decision making mechanism, incentive mechanism and restraint mechanism that can carry out a virtuous cycle through continuous improvement. Quality assurance and independent innovation is our company's consistent adherence.

Stainless steel has good corrosion resistance, heat resistance, low temperature strength and comprehensive mechanical properties. It is widely used in food equipment, chemical equipment and atomic energy industrial equipment. This type of austenitic stainless steel has good resistance to intergranular corrosion. It has excellent corrosion resistance in many oxidizing acids (such as HNO3). It is in alkaline solutions, most organic and inorganic acids, and atmospheric, water and It also has strong corrosion resistance in steam.



turning parts

Parameter of cnc turning parts


Available materials

stainless steel, steel, brass, bronze, aluminum and more

Process

CNC milling and turning, drilling, grinding, bending, stamping, tapping,tinning,zinc plating,wiping of oil.

Surface Roughness

Ra1.0-2.8

Drawing format

DWG/ IGS/ STEP/STEP,/IGES/X-T/PDF and etc.

Equipment

CNC machining center, CNC turning, General milling machines.

Surface treatment

Anodizing, zinc/chrome/nickel/silver/gold Plating, Polish, Heat treatment etc,Sand blasting,polish,powder coated and etc.

Packing

1. Prevent from damage.

2. Standard package / Carton box or Pallet / As per customized specifications

2 (4)

Our company chooses cutting tools with good toughness and high strength, and selects the relevant parameters of the tools reasonably according to the processing requirements; adopts appropriate chipbreakers to improve the chipping and breaking of the chips; determines the reasonable cutting amount; in addition, the sufficient supply of coolant also affects the processing process. Has an important impact. At the same time comprehensively consider the selection of relevant cutting parameters, and can comprehensively analyze and determine the best set of relevant cutting parameters through experimental methods.

2 (2)

2 (3)

2 (1)

2 (5)

The turning center is based on the lathe, and on the basis of it, the functions of power milling, drilling, boring, and sub-spindle are further added, so that the turning parts need to be processed twice, and the three-time processing procedures are completed on the turning center.
According to the turret form, the turning center can be divided into two types: comb type and turret type:
The limitation of the comb type is that there is a conflict between the working size of the processing and the number of tools. The workpiece is large, and the number of tools should be reduced. This is not conducive to the processing of large workpieces and complex procedures. The advantages are fast tool change speed and short processing time. It is efficient for processing small workpieces. Preferred.
The turret turning center is the turret rotates to replace another tool to process, in order to complete the complex processing steps, the number of driven tools can be more or less, depending on the size of the machine tool, the turret will take up a relatively large space, in addition A sub-spindle can be added to the tailstock position to simplify processing. In short, the turning center is a composite turning processing machine, which can greatly reduce the processing time and does not require re-clamping to meet the requirements of improving processing accuracy.



Under the right leadership, our sales of China Factory Stainless Steel CNC Lathe Turning Part and professional technical services have grown significantly and consolidated our leadership in the marketplace. While strictly controlling the quality, our company is committed to providing sincere service with the concept of 'quality-oriented, service-oriented', so the unqualified products will not leave the factory. The company has developed rapidly since its establishment, and our business has continued to grow and expand.

Send Inquiry