Product Details
Plastic remote control covers can be used for remote control of TV sets, air conditioners, and other electrical appliances, as well as for industrial remote controls, and are made of various materials, including plastic, rubber, ABS, etc. It is a device that protects the exterior of the equipment that remotely controls machinery by transmitting signals through infrared light.
Parameter of the plastic remote control covers
Product Description | smart plastic remote control covers |
Plastic Materials: | PS, ABS, PP, PVC, PMMA, PBT, PC, POM, PA66, PA6, PBT+GF, PC/ABS, PEEK, HDPE, TPU, PET, PPO,…etc. |
Other materials: | Rubber, Silicone rubber, LSR, Aluminum, Zinc, Copper...Metal…etc. |
Quality: | RoHS and SGS standard |
Feature: | Nonmarking and Non-flash |
Size: | According to your 2D, 3D Drawing |
Color, Quantity, Unit price, Tooling cost, Tooling size: | To be discussed |
Material selection reference for plastic remote control shell injection molding.
ABS material remote control shell
1、Light weight, heat insulation, heat preservation, moisture-proof, flame retardant, acid and alkali resistance, corrosion resistance.
2, it is desirable to take high material temperature, high mold temperature, but the material this high decomposition (temperature of 7270 degrees) for the higher precision plastic parts, mold temperature should be taken 50-60 degrees, high gloss, heat-resistant plastic parts, mold temperature should be taken 60-80 degrees.
3, the above need to increase the exhaust position.
Remote control shell made of PVC
1, amorphous material, medium fluidity, moisture absorption, must be fully dried, the surface requires glossy plastic parts must be preheated dry for a long time, 80 ~ ~ 90 degrees, 3 hours.
2, very easy to decompose, in contact with steel, copper at 200 temperature more easily decomposed, the molding temperature range is small.
3, the use of screw-type, injection machine, the aperture should be large to prevent dead ends with the material.
HIPS material remote control shell
1. Because HIPS resin absorbs moisture slowly, it does not need to be dried. In some cases, too much moisture on the material's surface is absorbed, impacting the final product's appearance and quality. To remove excess moisture, dry at 160°F for 2-3 hours. 2. 2. Extrusion machinery that is commonly used The melt temperature of the resin is 400-500 °F, and the melt index of the resin is 1.5-4.0 g/10min.
3. processing temperature 350-500 °F; however, for flame retardant grade HIPS, the processing temperature must be less than 470 °F to prevent additives from degrading.
To sum up.
1. ABS shrinks only at 99 degrees Celsius, PVC shrinks at 70 degrees Celsius, and HIPS softening shrinkage occurs at 85 degrees Celsius, which leads to deformation and expansion of the sheet, etc.
2. ABS is not irritating, PVC has a plastic smell, HIPS also has a plastic smell
3. ABS can be directly burned at high temperatures without atmospheric pollution, PVC produces dioxin gas, which may lead to the greenhouse effect, while HIPS material is soft, bending obviously white, burning will not produce atmospheric pollution.
4. As the remote control shell material, ABS is the top, PVC is the second, HIPS is the worst.
Hot Tags: plastic remote control covers, China plastic remote control covers manufacturers, suppliers, Precision Plastic Molding, Electrical Parts, Oem Plastic Injection Parts, Intercom Plastic Shell, Walkie Talkie Front Housing, Plastic Motor Cover