Product Details
Features:
The mountain bike phone holder uses high-quality environmentally friendly ABS plastic material
The innovative design of 360-degree movable bicycle base, better connection and free rotation-ingenious design, better connection and firmer
● Made of ABS brand new material, reasonable design, easy to install and use;
● Rotate the main body 360 degrees.
● Left and right clamping and fixing method, extension adjustment button, it is very convenient to fix/take;
● The wings on both sides can be adjusted up and down, and the fixed feet at the bottom of the frame can be stowed;
● Sponge silicone cushion, non-slip, can also effectively alleviate vibration and impact, protect your love machine;
● The bracket and the link base can be disassembled and assembled for use, which is easy to operate;
● Comes with a rubber pad, suitable for grips with different diameters
1. The mountain bike phone holder is composed of a bracket and a bicycle base, which can be rotated 360° freely and is easy to use. The bracket can be adjusted in width and length, so the phone is not afraid of being too big.
2. Mobile phone/GPS positioning and navigation mountain bike phone holder, the width of the clamp can be adjusted freely, suitable for all styles of PDA smart phones on the market, and also suitable for corresponding GSP navigation.
3. High-quality ABS material, beautiful and practical. The two-layer reinforced sponge clamp prevents the machine from tipping forward and falling. The clamp is pulled apart with a little force to facilitate the quick removal of the machine.
4. Easy and convenient installation: using strong double-sided tape, strong stability, suitable for most mobile phones on the market
Product parameters
| Product name | Bicycle mobile phone holder, PDA holder, GPS holder |
| Article number | 029B+BH |
| Color | Black |
| Applicable scene | Bicycle handle |
How to use mountain bike phone holder
1) Unscrew the tuning button, take out the lock cover and rubber pad.
2) Clean the location where the product is to be used and align it with the location to be placed. In order to make the product not easy to slide with the fixed location, it is recommended to use the two rubber pads provided.
3) Put the rubber pad in the lock ring, close the one-way lock cover, and tighten the tuning knob.
4) Swing the product a little harder; after confirming that the product has been firmly fixed on the object you placed.
5) Align the four buckles of the bracket with the four card slots of the bracket, and put them in along the slots, and push the slots in the direction of a relatively small slot until it makes a "click" to confirm the bracket The combination with the bracket is compact and in place.
6) Open the two supporting legs at the bottom of the bracket, and press the spring button built in the sidewall of the bracket to open the clamping arm.
7) Place the product to be clamped, and press the clamp arms on both sides of the bracket back at the same time to close it tightly until the clamped product is in tight contact.
8) Adjust the bracket and bracket of the mountain bike phone holder to the angle you need.
Demolition instructions:
Open the arm of the mountain bike phone holder bracket; remove the product placed on the bracket first to avoid falling injuries; hold the product to be disassembled with one hand; twist the tuning button with the other hand; remove the lock Cover; the bike phone holder can be removed at this time.
Hot Tags: mountain bike phone holder, China mountain bike phone holder manufacturers, suppliers, Mountain Bike Phone Holder